Consent for the use of cookies

You are here

IPV
Integrated
Photovoltaic

A showcase of case studies, 
products and tools for IPV

Supported by:

IEA PVPS Task 15 project aims to create an enabling framework to accelerate the penetration of BIPV products in the global market of renewables.

Operazione co-finanziata dall’Unione europea, Fondo Europeo di Sviluppo Regionale, dallo Stato Italiano, dalla Confederazione elvetica e dai Cantoni nell’ambito del Programma di Cooperazione Interreg V-A Italia-Svizzera

Chalet La Pedevilla

new construction

conservation area

Building use: 
residential
IPV architectural system: 
opaque roof
IPV integration year: 
between 2011 and 2015
Source: 
Eurac Research

Chalet La Pedevilla

Strada Pliscia 13, Marebbe (BZ), Italy

Introduction

Stakeholders

Aesthetic integration

Energy integration

Technology integration

Decision making

Lessons learnt

Data

Producer and installer

Map

Author

The building is a mountain chalet surrounded by the impressive scenery of the South Tyrol dolomite mountain ridges. It can be considered a modern interpretation of the old ‘Paarhof’, the traditional kind of farm building typical for South Tyrol, built with a local natural material such as pine wood and white Dolomite concrete (Leitner Electro Srl). A BIPV system is integrated on the wooden roof of the chalet.

STAKEHOLDERS

Main building designer: 

PEDEVILLA ARCHITECTS

IPV system designer: 

Leitner Electro Srl

IPV components producer: 

Aleo Solar GmbH

Product type: 
Address: 
Marius-Eriksen-Strasse 1, Prenzlau, Germany
Contact: 
info@aleo-solar.de +49 (0) 3984 8328 0
Web: 
https://www.aleo-solar.com/
IPV system installer: 

Leitner Electro Srl

Address: 
Via Ahraue 6, Brunico (BZ), Italy
Contact: 
info@leitnerelectro.com +39 0474 571 100
Web: 
https://www.leitnerelectro.com/index.php?lang=it
Other stakeholders: 

Bergmeister GmbH

The BIPV system is made of black modules replacing the conventional roof boards, in a way that the plant blends in very well with the dark roof.

The chalet is certified ‘CasaClima A’ and achieved the nZEB (nearly Zero-Energy Building) target, due to the exploitation of solar and geothermal energy and the employment of energy-efficient building solutions. The photovoltaic system was calculated to produce around 6,592 kWh per year. It is able to cover the building’s electric consumption for the ventilation system and the heat recovery. Around an 80% of the produced photovoltaic electricity is self-consumed. The system has access to the net metering scheme (Scambio sul Posto) (Leitner Electro Srl).

The 25 photovoltaic modules (Aleo Solar S_79 SOL) are mounted with special aluminium Solrif profile frames and fixed to the substructure with special mounting clamps, used to brace two modules to their frames in the overlapping area. This system ensures weather tightness thanks to the special horizontal interlock of the modules’ profile frames and the additional rubber lip placed between the overlapping module edges. The modules are naturally back ventilated, due to the distance between the modules and the roof. For safety reasons, the wiring and the connectors are placed in a grid gutter, fixed on fire-resistant plasterboard that separates the modules from the wooden parts of the roof.

From the beginning, the client, Arch. Armin Pedevilla, included the PV plant into the building project, driven by the purpose of creating a high-energy efficiency building, able to produce the energy required using most of the on-site available renewable energy sources. Once the economic feasibility was verified through simplified calculations, he confirmed the installation of the plant. The PV panels were architecturally integrated into the roof with the main goal of reaching a high level of aesthetic quality, matching the building’s dark painted oak exterior (Leitner Electro Srl).

The photovoltaic technology is integrated combining contemporary with traditional design. Simple standard PV modules are placed on the roof as if they were conventional roofing components blended into the dark wood boards, making the building a great example of photovoltaic integration with high replication potential. This example shows that reaching an overall high quality of a BIPV system requires a careful design, with care for details and sensitivity to the surrounding, but it does not always require specific custom-made products.

PROJECT DATA

Project type: 
Heritage constraint: 
Coverage of electric consumption [%]: 
100
BIPV SYSTEM DATA
Architectural system: 
Opaque roof
Integration year: 
2013
Active material: 
monocrystalline silicon
Module transparency: 
System power [kWp]: 
6
System area [m²]: 
43.3
Module dimensions [mm]: 
1,016 x 1,704
Modules orientation: 
South-East
Modules tilt [°]: 
30
Annual PV production [kWh]: 
6,592
BIPV SYSTEM COSTS
Total cost [€]: 
15,616
€/kWp: 
2,603
€/m²: 
361
IPV components producer: 

Aleo Solar GmbH

Product type: 
Address: 
Marius-Eriksen-Strasse 1, Prenzlau, Germany
Contact: 
info@aleo-solar.de +49 (0) 3984 8328 0
IPV system installer: 

Leitner Electro Srl

Address: 
Via Ahraue 6, Brunico (BZ), Italy
Contact: 
info@leitnerelectro.com +39 0474 571 100
Strada Pliscia 13, Marebbe (BZ), Italy

Eurac Research