Consenso all'uso dei cookie

Tu sei qui

IPV
Integrated
Photovoltaic

A showcase of case studies, 
products and tools for IPV

Con il supporto di:

IEA PVPS Task 15 project aims to create an enabling framework to accelerate the penetration of BIPV products in the global market of renewables.
Operazione co-finanziata dall’Unione europea, Fondo Europeo di Sviluppo Regionale, dallo Stato Italiano, dalla Confederazione elvetica e dai Cantoni nell’ambito del Programma di Cooperazione Interreg V-A Italia-Svizzera

The Dome

new construction

conservation area

Destinazione d'uso: 
educazione
Anno integrazione IPV: 
tra 2021 e 2025
Fonte: 
Progetto BIPV meets History

The Dome

Via Romania 32, Roma, Italy

Introduzione

Stakeholders

Approccio progettuale

Integrazione estetica

Integrazione energetica

Integrazione tecnologica

Processo decisionale

Dati

Produttore e installatore

Map

Autore

The new school building called "The Dome", located in the Luiss field in the Parioli district, has a photovoltaic system integrated on the roof.

STAKEHOLDERS

Progettista principale: 

Alvisi Kirimoto - Studio Gemma Progettazione

Progettista sistema IPV: 

Planex Srl

Produttore componenti IPV: 

Peimar Industries Srl

Indirizzo: 
Via Cefalonia 70, 25124 Brescia, Italy
Contatti: 
info@peimar.com +39 030 22 32 92
Web: 
https://www.peimar.com
Installatore sistema BIPV: 

Colaelectric Srl

Indirizzo: 
Via Stresa 45 B, Roma, Italy
Contatti: 
-
Web: 
-
Altri stakeholders: 

Fronius Srl

Consulenti: 

Paingea Srl

Direttore lavori: 

Arch. Cristiano Gemma

The design approach was to integrate the panels into the roof, also following a prescription from the State Superintendence, as the lot in question is subject to landscape authorization.

The dark color of the photovoltaic panel suite well with the materials present in the project. The Dome building is characterized by a system of façades elements composed of custom-made aluminum panels and a system of wooden brise soleil that wrap around the entire building. 

The energy produced by the PV system goes to the national electricity system.

The roof has standing seam sheet metal panels (Perfect Evolution 478 UNIMETAL type) as the last layer. The use of a clamp (Perfect Univers), which is anchored at the point where the sheets join each other, has allowed the anchoring of a steel box frame where the photovoltaic panels have been positioned in a slot prepared between the wooden planks. The photovoltaic panels are spaced about 15 cm from the sheet metal roof to facilitate the flowing of air. The cables pass through a shaft placed in the substructure of the aluminum façade and in the portion of the base with concrete block infill.

The present project represents an evolution of the project submitted for the application for the building permit, which had a roof completely covered with photovoltaic tiles. The rationalize and optimization of the system design has summarized the energy needs in portion of the roof.

DATI EDIFICIO

Tipologia progetto: 
Vincolo: 
DATI SISTEMA BIPV
Sistema architettonico BIPV: 
opaque roof
Anno di integrazione BIPV: 
2022
Materiale attivo: 
monocrystalline silicon
Trasparenza modulo: 
Potenza sistema [kWp]: 
14.96
Area sistema [m²]: 
80
Dimensioni modulo [mm]: 
992 x 1,675 x 40
Orientamento moduli: 
South-East
Inclinazione moduli [°]: 
12
Produzione FV annuale [kWh]: 
16.000
COSTI SISTEMA BIPV
Costo totale [€]: 
30.000
€/kWp: 
2.005
€/m²: 
375
Produttore componenti IPV: 

Peimar Industries Srl

Indirizzo: 
Via Cefalonia 70, 25124 Brescia, Italy
Contatti: 
info@peimar.com +39 030 22 32 92
Installatore sistema BIPV: 

Colaelectric Srl

Indirizzo: 
Via Stresa 45 B, Roma, Italy
Contatti: 
-
Web: 
-
Via Romania 32, Roma, Italy

Massimo Alvisi, Cristiano Gemma