Zustimmung zur Verwendung von Cookies

Sie sind hier

IPV
Integrated
Photovoltaic

A showcase of case studies, 
products and tools for IPV

Unterstützt durch:

IEA PVPS Task 15 project aims to create an enabling framework to accelerate the penetration of BIPV products in the global market of renewables.
Operazione co-finanziata dall’Unione europea, Fondo Europeo di Sviluppo Regionale, dallo Stato Italiano, dalla Confederazione elvetica e dai Cantoni nell’ambito del Programma di Cooperazione Interreg V-A Italia-Svizzera

eFORM color

Produzent: 

Sunovation GmbH

Adresse: 
Glanzstoffstraße 21, Elsenfeld, Germany
Kontakt: 
info@sunovation.de +49(0) 6022 / 26573-0

eFORM color

Produktart: 
Typologie: 
Marktverfügbarkeit: 
Aktives Material: 
monocrystalline and polycrystalline silicon
Farbe: 
black, blue, shades of red, brown, green, grey
Färbetechnik: 
front/rear glass printing or coating
Maße [mm]: 
up to 5,000 x 2,000 (or 10m²)
Kompatibilität: 
roof, façade and other components
Feuerzertifizierung: 
Bs1d0 classification
Anmerkungen: 

The color of SUNOVATION eFORM color is determined by the choice of the solar cell. The solar cell is visible in the glass-glass module and characterizes the overall look by its coloring and its surface effect.

 

SUNOVATION eFORM options:

- Laminated Safety Glass (VSG)

- Insulating glass

- Curved glass

- Matt glass

- Coated glass

 

Full edge design: by using cut, inactive solar cells, the appearance is carried on until the module edge. This is particularly suited for large-scale glazing without visible fixing elements.

 

Accessibility: the sensitive solar cells are embedded into a permanently elastic module composition with excellent attenuation properties and providing outstanding protection from mechanical influences. In combination with a properly configured glass construction high point loads can be transferred ensuring a safe accessibility of the modules, also in the event of thin cover glasses. This was confirmed by the Fraunhofer Institute and has already been successfully implemented in several large projects.

 

Sound insulation: SUNOVATION eFORM glass-glass modules have integrated sound insulation, thanks to their special silicone embedding technology. The airborne sound insulation values achieved are even higher than those of comparable glass constructions with special sound insulation films.

 

Fire classification: according to EN 13501-1, SUNOVATION eFORM receives the highest possible fire classification for PV modules "Bs1d0". In accordance with UL 1703, Category A „Spread of Flame" and A „Burning Brand“, they have also been successfully tested. SUNOVATION eFORM glass-glass modules thus perfectly meet the fire classification requirements even of category 4 and 5 buildings.

 

Concealed connections: electric cables are laid out and invisibly installed through hidden edge or back connections.

 

Installation: numerous sub structures available on the market can be used. The installation is carried out by competent metalworkers experienced in facade engineering.